It can be a challenge to keep the ice skates sharpened and in good condition. They’re costly, take up a lot of room, and are easily damaged. One of the most common problems with ice skates is water damage. If you don’t know to waterproof, then you’re at risk of this happening to you. We will discuss ice skate waterproofing using both commercial and home remedies. We’ll also provide some tips on how to care for them properly so that you can keep them in top condition for as long as possible!
Why Should You Have to Know How To Waterproof Ice Skates?
Skaters’ laces come undone, water gets in and feet get wet. Waterproofing ice skates is an essential part of taking care of your equipment and prolonging their life. Here are a few tips on waterproofing:
- Before you start, make sure that your skate blades are clean and dry. If they are not, you will only be trapping moisture in the skate which can lead to rusting;
- To begin waterproofing, hold the can about 12 inches from the skate and spray a light coat over the entire boot;
- Be sure to get under the tongue and around the ankle area where water can easily seep in;
- Once you have a light coat all over the boot, let it dry for about 15 min;
- After it is dry, put on a second coat, this time focusing on the seams and stitching. These are areas where water can easily get in and ruin your skates;
- Let the second coat dry before using;
- Ice skates that are not waterproofed will rust and degrade quickly. It is also important to dry your skates after each use to prevent moisture from building up inside the skate ;
Why Use Sno Seal to Waterproof Your Ice Skates?
Sno Seal is available in most sporting goods stores, and it’s relatively inexpensive. You can also find Sno Seal online.
Ensure That Your Skates Are Dry
The first step to waterproofing is to ensure that they are dry. If the skates are wet, the water will just soak into the leather and won’t do anything to protect them.
To dry your skates, you can either let them air dry or use a hairdryer on the cool setting.
Apply a thin layer of beeswax
Once your skates are dry, you’ll want to apply beeswax to them for creating a barrier between the water and the leather.
Put on thick socks and tie up your laces
Once you’ve applied the beeswax, put on a pair of thick socks, and tighten the laces. This will help the beeswax to spread evenly over the surface of the skate.
Apply another layer of beeswax
Once you’ve got your socks and laces on, you’ll want to apply another layer of beeswax. This time, you’ll want to focus on the areas that are most likely to get wet, such as the tongue and toe area.
Again, you can find beeswax at most craft stores or online.
Put your skates in a plastic bag
After you’ve applied the second layer of beeswax, you’ll want to put your skates in a plastic bag for keeping the beeswax from getting on your clothes or anything else. 
Applying the Sno Seal
The next step is to apply the Sno Seal. This can be done with a brush or by using your fingers. Make sure to get an even coat on the entire boot, paying special attention to the stitching. Once you’re finished, let the boots dry for at least 24 h.
If you’re looking for something that will last longer and doesn’t require as much maintenance, consider using wax. You can either buy a commercial product or make your own by melting paraffin wax and adding a few drops of mineral oil.
To apply the wax, first heat up the boots with a hair dryer or by placing them in front of a fan. This will help the wax to penetrate more deeply into the fabric. Next, use a brush or your fingers to apply an even layer of wax to the entire boot. Once you’re finished, let the boots cool before using them.
Wax is more durable than Sno Seal and won’t make your boots as stiff. However, it can be difficult to apply evenly and may need to be reapplied more often than Sno Seal. 
Whatever you do, keep your ice skates waterproof to extend their life and keep them looking brand new. With a little bit of effort, you can enjoy many years of skating on your favorite frozen pond.
Waterproofing Ice Skates for Kids
Do you want to ensure your kids’ ice skates are properly waterproofed? Here’s a quick and easy guide on how to do it!
First, start by checking the condition of the boots. If they’re cracked or damaged in any way, it’s best to replace them before waterproofing. Otherwise, the water will just seep right in and cause more damage.
Next, clean the boots with a mild soap and water solution. This will cleanse the fabric of any dirt or blockages that would stop the waterproofing from being effective.
After the boots are clean and dry, apply a very thin layer of beeswax to the entire surface. You can also use another type of waterproofing wax or spray, but beeswax is the most effective.
Finally, buff the boots with a clean cloth to make them shine. Your kids’ ice skates will now be properly waterproofed and ready for action!
Waterproofing Ice Skates for Shoes
Many people think that waterproofing is only necessary for hockey players, but it’s actually a good idea for figure skaters as well. Here are a few tips on waterproofing:
- Use a waterproofing spray or cream. You can find these at most sporting goods stores;
- Make sure to apply the waterproofing evenly over the entire surface of the skate;
- Let the skate fully dry;
Waterproofing Ice Skates at Home
Here’s a list of what you’ll need:
- A container that can fit your ice skates in (a shoe box works well);
- Waterproofing spray (you can find this at most hardware stores);
- Paper towels or old rags;
- An old toothbrush (optional);
Here’s a step-by-step tutorial on waterproofing at home:
- First, take your container and place your ice skates inside. Make sure they’re not too snug inside the container so the water can circulate around them;
- Next, take your waterproofing spray and evenly coat the outside of your ice skates. Use the old toothbrush to help get into all the nooks and crannies. Once they’re coated, let them sit for a few minutes so the waterproofing spray can dry;
- Finally, take your paper towels or old rags and wipe off any excess waterproofing spray. And that’s it! Your ice skates are now waterproofed and ready for action;
How Long Do Hockey Skate Laces Last?
Hockey skate laces are designed to last for many years with proper care. However, the elements can take their toll, so it’s a good idea to inspect your laces regularly and replace them if they show signs of wear and tear.
When it comes to extending the life of the skate laces, be sure to:
- Store them in a cool, dry place when not in use;
- Avoid getting them wet whenever possible;
- Keep them clean and free of dirt and debris;
How do I keep my ice skates from rusting?
The best way is to waterproof them for preventing moisture from getting into the metal and causing it to corrode. You can purchase a waterproofing spray or wax from most sporting goods stores.
Another way is to dry your skates thoroughly after each use. Moisture is the main cause of rust, so if you can keep your skates dry, you’ll be less likely to see any rust formation.
If your skates start developing some rust, you can try using a Rust eraser or sandpaper to remove it. Just be sure not to damage the metal beneath the rust.
Finally, always store your skates in a dry place when you’re not using them. This will help to further prevent rust formation. 
How do I protect my skates?
To protect your skates, you’ll want to waterproof them. You can do this by using a waterproofing spray or wax. Be sure to follow the directions on the product you choose.
By waterproofing your skates, you will increase their lifespan and prevent rust. It’s also a good idea to store them in a dry place when you’re not using them.
How do I keep my ice skates white?
Another way to keep your ice skates looking their best is to regularly wipe them down with a damp cloth. If you notice any rust spots developing on your blades, you can remove them by rubbing the spot with a little bit of vinegar.
Finally, it’s important to always dry your skates off after each use for preventing the formation of rust and will keep your blades from dulling too quickly. Simply wiping them down with a dry cloth should do the trick. 
Do you need soakers for ice skates?
The answer to this question is both yes and no. While soakers can help to extend the life of your ice skates, they are not absolutely necessary. However, if you do choose to use them, be sure to select a pair that is made specifically for ice skates.
There are a few different methods. The most essential thing is to ensure that you do it properly so that your skates will last longer and perform better on the ice. 
One method is to purchase a commercial waterproofing spray or gel and follow the instructions on the packaging. This method is quick and easy, but it may not be as effective as some of the other methods.
How often should you get new hockey skate laces?
Hockey skate laces should be replaced when they show signs of wear and tear. Depending on how often you skate, this could be anywhere from once a month to once every few months. You’ll know it’s time for new laces when the ends start to fray or the laces become too stretched out to tie properly.
Skate guards are another important part of taking care of your skates. They help protect the blades from getting damaged when you’re not skating, and they also keep your blades from rusting. Skate guards come in different sizes, so make sure you get ones that fit your skates snugly.
It’s also a good idea to get a blade cover for your hockey skates. Blade covers help protect the blades from dirt and moisture when you’re not using them, and they also make it easier to transport your skates without damaging the blades.
When should you replace your hockey skates?
Hockey skates generally last between years, depending on how often you use them and how well you take care of them. You should replace your hockey skates when:
- The blades are dull or nicked;
- The boots are starting to come apart at the seams;
- You can no longer get a good edge on the ice;
- Your feet have outgrown the skates;
If you take good care of your hockey skates, they can last for many years. But if you use them frequently or are hard on them, you may need to replace them more often.
Useful Video: How To Sno-Seal Your Ice Skates (Waterproof)
Waterproofing your ice skates is the best way to prevent rusting. You can purchase a waterproofing spray or wax from most sporting goods stores. Another way to help prevent rust is to dry your skates thoroughly after each use. If your skates start developing some rust, you can try using a Rust eraser or sandpaper to remove it. Finally, always store your skates in a cool, dry place when you’re not using them.
We hope this guide was helpful! Happy skating!