If you’re a skateboarder, then you know that having a good ramp is important. Not only does it make your tricks look better, but it also keeps you safe. One of the biggest problems with ramps is that they can easily become damaged by water. In this article, we will teach you how to waterproof your skateboard ramp and keep it in good condition!
How Do You Weatherproof a Skate Ramp?
Skateboard ramps can be made from a variety of materials, but most are made from wood. And while wood is a durable material, it is not immune to the elements. Water can cause your ramp to rot and warp, so it’s important to take precautions to waterproof your ramp.
There are several ways you can waterproof your skateboard ramp:
- One way is to seal the wood with a water-resistant sealant. This will create a barrier between the wood and the water, preventing the wood from absorbing moisture;
- Another way to waterproof your skateboard ramp is to paint it with waterproof paint. It will also make your ramp more visible, which can be important for safety;
- Finally, you can also cover your skateboard ramp with a tarp or other waterproof material. This will keep the elements off of your ramp and help to protect it from damage [1];
It’s important to regularly check your ramp for signs of water damage. If you see any warping or rotting, take action to repair the damage and prevent further deterioration. By taking these steps, you can ensure that your skateboard ramp will last for years to come.
What Do You Seal a Skate Ramp With?
You can use any type of sealant designed for concrete, such as acrylic sealer, polyurethane sealer, or epoxy sealer. All of these options will protect your ramp from water damage and wear and tear.
Acrylic sealers are the most popular option because they are easy to apply and relatively inexpensive. However, they don’t last as long as other types of sealants and will need to be reapplied more often.
Polyurethane sealers are more durable than acrylics and will last longer before needing to be reapplied. They can be more difficult to apply, however, so make sure you follow the instructions carefully.
Epoxy sealers are the most expensive option, but they are also the most durable. They create a hard, protective coating that will last for many years.
Applying sealant to your ramp is a simple process, but there are a few things you need to bear in mind:
- First, ensure the surface is clean and dry before you begin. Any dirt or debris will prevent the sealant from adhering properly [2];
- Next, apply the sealant with a brush or roller, working in small sections until the entire ramp is covered. Be sure to follow the instructions on the product label for the best results;
- Finally, allow the sealant to fully dry before using your ramp. This usually takes 24-48 hours, so be patient! Once it’s dry, your ramp will be protected from the elements and ready for action;
How Much Does It Cost to Build a Mini Ramp?
Building a skateboard ramp is a great way to get outside and enjoy some fresh air while honing your skills. But if you don’t take the time to waterproof your ramp, you’ll be in for a nasty surprise the first time it rains.
Waterproofing your ramp doesn’t have to be complicated or expensive. In fact, there are several methods you can use that will protect your ramp from water damage without breaking the bank.
4 Ways to Waterproof Your Skateboard Ramp:
Method #01: Use Polyurethane
Polyurethane is a clear liquid that dries to form a hard, protective coating. It’s often used to waterproof wood and other materials, and it’s an excellent choice for sealing a skateboard ramp.
Method #02: Use Epoxy Resin
Epoxy resin is another clear liquid that can be used to waterproof a skateboard ramp. Like polyurethane, it forms a hard, protective coating when it dries.
To use epoxy resin to waterproof your ramp, mix the substance according to the manufacturer’s instructions and then apply it to the surface with a brush or roller. Allow the first coat to dry completely before applying a second coat.
Method #03: Use Liquid Rubber
Liquid rubber is a thick, black substance that dries to form a waterproof barrier. It’s often used on roofs and other areas where water resistance is important.
Method #04: Use Silicone Sealant
Silicone sealant is another option for waterproofing your skateboard ramp. It’s easy to apply and dries clear, making it an ideal choice for sealing cracks and joints.
Applying silicone sealant to your ramp provides a waterproof surface with just a single layer. To do this, use a caulking gun to apply the substance evenly over the surface.
How Do You Cover a Mini Ramp?
The most common way to cover a mini ramp is with a tarp. You can usually find these at your local hardware store. Make sure to get one that is big enough to cover the entire ramp. You will also need some bungee cords or rope to secure the tarp.
Another option is to use a product like RAMP-COAT. This is a spray-on coating that will waterproof and protect your ramp. It is important to follow the directions carefully when using this product.
What Should I Use to Protect My Ramp?
There are a few different ways to waterproof your skateboard ramp, depending on the materials you’re using and how much protection you need. For example, if you’re just looking to protect your ramp from the elements, you can use a tarpaulin or a weather-resistant sealant. However, if you want to make sure your ramp is completely waterproof, you’ll need to use a more durable material like epoxy resin.
To apply epoxy resin, you’ll need to mix the two parts together and then brush them onto your ramp. Once it’s dry, it will be clear and waterproof. You can find epoxy resin at most hardware stores or online.
Once you’ve applied the epoxy resin, you’ll need to give it time to cure before using your ramp. This usually takes 24 hours, but depending on the temperature and humidity, it could take longer. After it’s cured, your ramp will be completely waterproof and ready for action!
Covering your ramp is a great way to protect it from the elements and extend its lifespan. There are several options for covers, including tarpaulins and hardboards.
Tarpaulins are a popular choice for covering mini ramps because they’re inexpensive and easy to install.
Hardboards are another option for covering a mini ramp. Unlike tarpaulins, hardboards provide a solid surface that can be painted or used as-is. Hardboards can be attached to the ramp using screws, nails, or adhesive strips. [4]
Paint Your Ramp
Painting your ramp is another great way to protect it from the elements and extend its lifespan. You can use any type of paint that’s designed for outdoor use, such as latex or acrylic. Just make sure to follow the manufacturer’s instructions for the best results.
Use a Tarp
If you’re just looking to protect your ramp from the elements, you can use a tarp or a weather-resistant sealant. Tarps are inexpensive and easy to install, simply drape the tarp over the ramp and secure it in place with weights or bungee cords.
Weather-resistant sealants are another option for protecting your ramp from the elements. They create a barrier that repels water, moisture, and other liquids. Most sealants can be applied with a brush or roller and will dry clear within 24 hours.
Once you’ve applied the tarp or sealant, your ramp will be protected from the elements and ready for action!
Can a Masonite Ramp Be Resurfaced with A Hardboard?
There are several ways to waterproof a Masonite ramp. You can use a sealant, primer, or paint that is specifically designed for waterproofing. You can also apply a layer of fiberglass or polyurethane to the surface of the ramp. [5]
When applying a sealant, primer, or paint, be sure to follow the manufacturer’s instructions carefully. Generally, you will need to apply multiple coats and allow each coat to dry completely before applying the next.
Applying a layer of fiberglass or polyurethane is a bit more involved than simply painting or sealing the ramp. First, you’ll need to roughen up the surface of the ramp with sandpaper so that the fibers can adhere properly. Next, you’ll need to apply a layer of resin to the ramp and then lay down the fiberglass or polyurethane.
Once the fiberglass or polyurethane is in place, you’ll need to let it cure for several hours before skating on it. Be sure to follow the manufacturer’s instructions carefully when applying these materials.
Applying a hardboard to a Masonite ramp is possible, but it’s not recommended. Hardboards are not as durable as Masonite and will require more frequent replacement. In addition, hardboards are not as waterproof as Masonite, so they will not protect your ramp from the elements as well.
If you decide to resurface your ramp with a hardboard, be sure to use screws or nails to secure the hardboard to the ramp. Do not use glue, as this will make it difficult to remove the hardboard when it needs to be replaced. Also, be sure to apply a sealant or primer to the hardboard before painting or staining it. This will help protect the hardboard from moisture and ensure that the paint or stain adheres properly.
FAQ
How do you weatherproof a skate ramp?
There are a few different ways that you can weatherproof your skate ramp:
- One way is to use a sealant on the ramp. This will help to create a barrier between the elements and the ramp itself;
- Another way is to paint the ramp with a waterproofing agent. This will also help to create a barrier between the elements and the ramp itself;
- Finally, you can cover the ramp with a tarp when it is not in use. This will help to protect it from the elements and keep it looking new for longer;
When it comes to weatherproofing your skate ramp, there are a few different options available to you. You can use a sealant, paint it with a waterproofing agent, or cover it with a tarp when it is not in use. Each option has its own set of benefits and drawbacks, so it’s important to weigh each one carefully before making a decision.
Sealant:
- Pros: Creates a barrier between the elements and the ramp;
- Cons: Can be difficult to apply evenly, and may need to be reapplied regularly;
Waterproofing Agent:
- Pros: Also creates a barrier between the elements and the ramp;
- Cons: Can be difficult to apply evenly, and may need to be reapplied regularly;
May also change the color or appearance of the ramp.
Tarp:
- Pros: Easy to use, and can be removed when not needed;
- Cons: Will need to be replaced regularly, and may blow away in strong winds;
How do you cover a ramp in the rain?
If you don’t have a waterproofing solution handy, one quick way to cover a ramp in the rain is to use a tarp. You can buy tarps at most hardware stores, and they come in a variety of sizes. When choosing a tarp, make sure to get one that’s big enough to cover the entire ramp.
To set up the tarp, first lay it over the top of the ramp. Then, use some heavy-duty tape or bungee cords to secure the tarp in place. If you’re using bungee cords, hook them onto the loops on the sides of the tarp. Once everything is secured, you can rest easy knowing your ramp is protected from the elements. [6]
Is skate paint waterproof?
Most skateboard paints are waterproof, but there are some that are not. You’ll need to check the label on the paint can to be sure. If you’re unsure, you can always test a small area of the ramp first before painting the entire thing.
Another option is to use a waterproof sealant on your ramp. This will provide an extra layer of protection against water damage. Sealants can be applied after the paint has dried, or they can be applied before painting for even better protection. [7]
What can I use for the skate ramp surface?
There are a few different options when it comes to skating ramp surfaces. The most popular option is plywood, but you can also use MDF or OSB. Plywood is the best option because it’s strong and durable, but it’s also the most expensive. MDF is a cheaper alternative, but it’s not as strong and can be damaged easily. OSB is the cheapest option, but it doesn’t have the same strength and durability as plywood.
If you’re on a budget, OSB is probably the best option for you. However, if you can afford it, we recommend going with plywood. It will last longer and withstand more wear and tear.
Another thing to consider is whether or not you want to paint or stain your ramp. Painting is a good option if you want to customize the look of your ramp. It’s also a good way to protect the wood from weather and sun damage. However, painting can be a lot of work and it can be difficult to get a smooth finish.
Staining is an easier option, but it doesn’t offer as much protection from the elements. If you decide to stain your ramp, we recommend using a clear coat sealer to help protect the wood.
What kind of waterproofing should I use?
There are two main types of waterproofing: sealants and membranes. Sealants are applied to the surface of the ramp and act as a barrier between the water and the wood. Membranes are applied to the underside of the ramp and act as a barrier between the ground and the ramp.
Sealants are the most popular option because they’re easy to apply and they don’t require any special skills or tools. They’re also relatively inexpensive. However, sealants don’t offer as much protection as membranes.
Membranes are more expensive than sealants, but they offer better protection against water damage. They’re also more difficult to apply, so we recommend hiring a professional if you decide to go with this option.
Whichever waterproofing option you choose, make sure you apply it evenly and according to the manufacturer’s instructions. Otherwise, you won’t get the full benefit of the product.
Useful Video: Weatherproofing Your Ramp
Conclusion
Waterproofing a skateboard ramp is a great way to protect your investment and keep your ramp in good condition for years to come. By following the steps outlined in this guide, you can easily waterproof your own skateboard ramp and enjoy peace of mind knowing that your ramp is protected from the elements. Thanks for reading!
References:
- https://goneoutdoors.com/make-skateboard-ramp-waterproof-5676802.html
- https://ocramps.com/blogs/industry-chatter/weatherproofing-your-ramp
- https://muhammadardhi.com/how-much-does-it-cost-to-build-a-mini-ramp/
- https://homeguides.sfgate.com/use-wood-ramp-prevent-slipping-84416.html
- https://www.slapmagazine.com/index.php?topic=46651.0
- https://www.doityourself.com/stry/keeping-a-wheelchair-ramp-safe-during-rain
- https://www.xtremeskater.com/ramp-plans/faqs/
